When do i need to wax my snowboard

Before the iron goes anywhere near your base, make sure to loosen off or fully remove your bindings. Clean the base. Make sure that any old wax and dirt is removed from the base so that the fresh wax can be absorbed properly. This can either be done by using a base cleaner and cloth, or by the hot scrape method. A hot scrape involves using an iron to apply a thin layer of hot wax and then immediately scraping it off while the wax is still warm in order to get rid of any grime from the pores.

Once finished, wipe over the base with a cloth to remove any remaining residue. Pick your wax. Melt the wax. Warm up the iron to a medium heat and then hold the wax against the iron until it starts to melt the wax at a slow drip.

Iron the base. Next, place the iron on the base of the board and move it around in a circular motion. They will tune new snowboards before skiing them to get their preferred edge profile.

If you have to ask whether a new snowboard needs its edges sharpened than the answer is no. Snowboards need to be waxed when the base dries out and has no wax in it anymore. You will see areas of white chalky appearance in the base where it has no wax. These areas form along the edges and spread into the middle. When there is no wax your snowboard bottom will feel rough and dry.

When they have wax they will feel smooth and slick. You might notice that your snowboard also starts sticking to the snow when it needs to be waxed. There is no overdoing wax on your snowboard.

There is no such thing as waxing it too much. Not enough wax can damage a snowboard when water gets into the wood cores. When in doubt, add more wax. There is a giant range of opinions on this.

Some people say you should wax your snowboard after every 6 to 8 hours of snowboarding. That is 1 long day of riding. Most people do not wax their snowboard that often.

Every 5 to 10 days snowboarding during the winter is a good interval. If your someone who only snowboards a few days a winter that can be enough. Once you get to spring boarding where sap and other junk start floating up in the melting snow you need to wax more often. If you snowboard somewhere with high junk content in the snow you might need to scrape and wax after every session.

If the snow is cleaner with less tree sap then you can do it every few snowboarding days. Look at your snowboard at the end of the day and see if there is sap or other residue building up on the bottom. Congratulations on getting a new snowboard. Do new boards come waxed from factory so that they are shred-ready? Is de-tuning needed? Is there a need to re-wax it? What about the edges? In terms of waxing your board will most likely come with a factory wax.

You mention the new board being used months after purchase. In this case you might want to check the base to see if it needs waxing. In terms of detuning this will depend on the snowboard. Some boards come de-tuned and others could do with a detune.

Usually for a new board I would ride it first up as is and then make a call on whether or not it needs detuning. Detuning is usually only done for freestyle boards — which it sounds like is the style of riding you are wanting to do.

SO at some point again depending on the board you might want a detune. Again if you are taking your board to a shop they should be able to tell you whether or not you should get a detune and should be able to do it for you. Even if you plan on doing it yourself at some point I would take it to a shop the first time.

Just me though. Your email address will not be published. Save my name, email, and website in this browser for the next time I comment. More Details. Just one more thing to do. Simply go to your inbox and you will find an email:. Simply click the "Confirm My Email" link in that email to confirm your email address.

It will depend on a number of things including: The construction method for the base of your snowboard; How often your board is in use; The conditions you usually ride in; and How fast you want your snowboard to be The base of your board There are two main types of snowboard bases used in the market today: Sintered bases Extruded bases Again which of those you go with will depend on a few things. This means a couple of things: That it will absorb more wax That extra wax that it absorbs means a properly waxed sintered base will ride much faster than an extruded base But if you neglect waxing a sintered base it will be slower than an unwaxed extruded base.

A waxed sintered base is faster than a waxed extruded base And unwaxed sintered base is slower than an unwaxed extruded base So, in order to maintain the benefits of having a sintered base it needs waxing more often. How often your board is in use Naturally if your board is used more often then you will need to wax more often — if it used less often it will need waxing less often.

Your waxing job will last a lot longer if you have only been surfing on nice soft pow! How you can tell if your Snowboard needs Waxing Check out this video for a quick overview of how you can tell if your board needs waxing. At the other extreme some people never wax their board — or never wax particular boards.

Sintered Bases For maximum performance on a sintered base you probably want to wax every full days of riding. Extruded Bases You have a little bit more leeway with extruded bases.